With this mount, you can install the transducer on the transom of your boat and allow for adjustment of the transducer angle.
GARMIN TRANSOM MOUNT
Easily secure your compatible 4-, 8-, or 12-pin transducer to the transom of your boat with this mount, providing ultra-precise sonar readings at any speed. Because the transducer is always in the water, the mount does not protect it from underwater obstacles. Therefore, drag is possible. The included transducer splash guard reduces excess water splashing onto the compatible transducer when the boat is traveling at high speeds.
With this mount, you can also install the transducer on the transom of your boat, allowing you to adjust the transducer angle so it's parallel to the water surface and avoid drag. Because the transducer isn't submerged in the water with this installation, the fishfinder won't detect the bottom when the boat is on level ground.
Specific References
No customer reviews for the moment.
This transom transducer provides images
ultra-sharp scanning of objects.
Upgrade to 1 kW without fairing with this flush mount bronze housing.
The 8-pin transducer includes traditional mid-band CHIRP sonar (80-160 kHz) and a 600W power rating.
Chartplotter with 10 "touchscreen and Full HD IPS (In-plane Switching) screen
Inline terminator for NMEA 2000
Protective cover for Striker series Fishfinder sounders
Connect an 8-pin transducer to a 4-pin sonar port
Use this adapter cable to connect a 12-pin transducer
compatible with a compatible echoMAP™ 7Xsv or 9Xsv device.
The GMS 10 is a network hub with 5 self-configuring inputs.
Starter kit has everything you need to build an NMEA 2000 network.
White nylon grommet for 5 mm RG-58 cable with one or three outputs depending on the orientation of the cover.
Pack consisting of two bases and two lids.
Connect a 4-pin transducer to an 8-pin sonar port
on a marine device compatible with this adapter cable.
