OKUMA MAKAIRA 10 DOUBLE SPEED REEL

Okuma lever drag reels Okuma Makaira SEa lever drag reels featuring

a special edition of gun smoke and black anodizing. The system of

Carbonite dual force drag maximizes drag pressure

high-end, efficiency and overall smoothness. The oversized grip

and the low speed gears compared to the original Makaira offer a torque

extreme for the Makaira SEa. Features Open the spool bearings with oil

TSI-301. Increases freespool 2-1/2 times. MK80WIISEa and MK-130IISEa are equipped with

Grease-rich Coil Bearings All non-coil bearings feature a

Complete grease package for maximum longevity. Features a special edition

of gun smoke and black anodizing. The SE coils feature a tuna fin

yellow engraved on the side plate. The frames have been machined to increase the clearance

between coil and crossbars. MK-8/10/15 feature MK-20 sized knobs. MK-20/30

Features MK-50 arm and knobs 1.3:1 gear ratio at low speed

featuring 20/30 size. 1.0:1 gear ratio at 4-speed

lower featuring 50 dimensions. Gunmetal anodized type II frame,

side plates, spool, drag lever and handle

MACHINED RIGID STRUCTURE

Okuma's machined rigid frame construction incorporates a frame

made of aluminum entirely machined in a single piece. These rigid aluminum frames

from bar are the ultimate in precision alignment and tolerances with

greater pressure and torque than any other material used

in our industry for frame materials. Okuma presents these anodized frames

on fly reels, baitcast reels, baitcast reels lever drag reels and

star trolling reels. T-BAR HANDLE The patented T-bar handle design

offers an ergonomically correct angle to ensure a fisherman maximum

power with minimal effort. The T-bar takes full advantage of the natural dynamics of the

human hand, wrist and forearm to help support power and

fisherman's resistance.

2 SPEED GEAR

Okuma 2-speed technology Okuma incorporates two sets of main gears

and stainless steel pinion gear, allowing anglers the option of a ratio

of high-speed transmission or a low-speed transmission ratio for the

maximum power and torque. Changing gear is as easy as pressing a button or

Press a lever with Okuma's unique shift design to obtain the gear ratio

you want. LEVER DRAG DOUBLE STRENGTH DRAG For extremely smooth drag

and powerful, Okuma's Makaira lever drags are designed with a patented system

Dual Force Drag. This drag system is specially designed for

be mounted on the right side of the reel, designed around a drag system

a drawbar that keeps all the mechanical mechanisms in precise alignment

and does not exert any pressure on the frame. This system works in combination

with a custom designed thrust bearing, which relieves side load in

case of strong stresses.

HELICAL CUTTING GEARS

Makaira lever drag reels utilize helical cut main and pinion gears.

This process allows for better meshing of the gears, which equates to a

improved smoothness of the gears. The angled teeth present in the gears

Helical cut teeth engage more gradually than straight cut or straight tooth teeth.

This allows the helical gears to run smoother and quieter than

to cylindrical gears. Cylindrical gears cause impact stress and noise, to

because of the hard meshing and cannot handle the same torque as the gears

helical because their teeth are receiving impact shocks as they join together.

SILENT ANTI-REVERSE

Makaira's proprietary anti-reverse system provides a smoother, quieter feel.

We match this feeling with that of a Lexus, when compared to other rollers on the market.

Most reels on the market hide their rough gear quality

from the noise and vibrations caused by the engaging and rattling of the anti-reverse pawls.

The Okuma Silent System is unlike any other 2-speed reel in the industry

for smoothness. This anti-reversal system is supported by a pawl system

12-point double-point anti-inversion. The Makaira system is very simple in principle

but the performance is extremely advanced. As you turn the reel forward,

Anti-reverse pawls open allowing for friction-free, quiet retrieval.

As soon as the handle is stopped or pulled back, the anti-reverse pawls are

inserted into position by their sliding system driven by the drive shaft.

The strength of this anti-inversion system is not only based on a dog spring like that

of most of our competitors' reels. The scrolling function doesn't do much

relies on a dog spring system and is primarily controlled by movement in

back and forth applied to the crankshaft through the motion of the fisherman turning the handle.

CRC Corrosion Resistant Coating combines proprietary HDG-II gear system

from Okuma, which offers exceptional anti-corrosion properties compared to standard gears,

with a Corrosion X HD coating on all internal and external parts. The CRC process penetrates

actually and binds to the metal, which helps significantly towards long-term protection.