Two-component epoxy glue without solvent
EPOSEALER RESIN BICOMPONENT BONDING A + B 500ML + 250ML
Solvent-free liquid epoxy resin catalyzed with a cycloaliphatic amine with high insulating and adhesive power
Used for wood-wood, wood-fiberglass or fiberglass-fiberglass bonding
PREPARATION OF THE SUPPORT AND APPLICATION CYCLE
Wood + Wood / Wood + Fiberglass / Fiberglass + Fiberglass gluing
Clean, degrease and, where possible, sand the supports to be glued which must be compact and sound. Catalyze the necessary quantity in the ratio 2 (A) + 1 (B) by volume, mix thoroughly a few minutes before applying on both sides to be glued with a brush and / or a notched trowel. Then join the two parts and tighten them with clamps. The start of taking begins after 3 or 4 hours. After about 7 days the crosslinking will be complete and the structural performances will be definitive.
Application
| Roller brush | |
| Blend a + b by volume | 2 Part.Sol.A with 1 Part.Sol.B |
| Pot life a + b (20c) | Use mixture within 30-50 minutes |
| Brush-roller dilution | Ready to use |
| Complete drying | 7 days |
| Overcoating time | 24 hours (20 °) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Recommended dry thickness | 100 microns per hand |
| Theoretical yield m2 / liter | 5 |
Typology
| Two-component | |
| Type of binder sol a | Liquid epoxy resin |
| Specific weight kg / l (± 0.05) | 1.136 (A) - 0.970 (B) |
| Viscosity ford | 12 sec. (Ø8 at 20 ° C) |
| Storage (+ 10- + 30c) | 12 months sealed containers |
Specific References
No customer reviews for the moment.
One of the best known glues in the world for the repair of water sports items, such as diving suits and fishing waders.
Marlin Self-polishing antifouling for boats
Treatment to prevent or even block fiberglass osmosis
Specific antifouling thinner essential for marlin and antifouling paints
suitable for grouting or zone filling
which must withstand mechanical stress
suitable for grouting or zone filling
which must withstand mechanical stress
Used as a primer or undercoat in nautical cycles, it is also suitable for flooring and tanks.
containing oils, naphtha, kerosene and soda solutions.
Epoxy resin for boat treatment
Special high density paint,
in convenient spray packaging,
for the quick touch-up of fiberglass parts coated with gelcoat and polyester resin.
Thinner n. 1 suitable for the following Kristal enamel and paint products; Teak oil; Teak oil
Special high density paint,
in convenient spray packaging,
for the quick touch-up of fiberglass parts coated with gelcoat and polyester resin.
