AEMME COLORI SINTLAC SINGLE COMPONENT ENAMEL 750 ML

Glossy, covering finishing enamel,

white or colored for superstructures and maintenance

on board fishing boats and vessels in general.

Applicable only on parts above the waterline,

it is marketed at a non-negligible quality-price ratio.

Available in various colours as per colour chart.

New iron. The surface must be clean, dry and well degreased.

free from rust or traces of calamine.

Apply 1 or 2 coats of EVIOX CROMOMINIO primer

followed by 2 coats of SINTLAC enamel in the desired shade,

respecting the recommended overpainting times.

New wood. Apply 1 or 2 coats of EVIOX CROMOMINIO primer.

or apply 2 coats of SINTLAC enamel directly

in the desired color, respecting the overpainting times.

Already painted surfaces: If the old paints

they appear not perfectly anchored or crumbly,

they must be removed mechanically.

Clean the surface with detergent and rinse.

Let it dry well.

Then proceed to fill any irregularities in the surface if necessary,

sand and follow the instructions for new surfaces (wood or iron).

However, if the pre-existing finish was in good adhesion conditions,

clean, sand and apply 1-2 coats of SINTLAC enamel in the desired shade,

respecting the overpainting times.

NOTE: In summer and/or at temperatures above 20°C, it is recommended

for brush application, dilution with Dilatant 109.