WATER SOLUBLE STRIPCENAENA STRIPPER 750ML
€25.90
Tax included
Water soluble paint stripper for boats
WATER SOLUBLE STRIPCENAENA STRIPPER 750ML
Water-soluble paint stripper based on special non-toxic compounds capable of dissolving the antifoulings from the fiberglass hulls without damaging the gelcoat or the polyester reinforced with glass fibers
The product is available in the 750 ml pack
PREPARATION OF THE SUPPORT AND APPLICATION CYCLE
FIBERGLASS PAINTED WITH ANTIFOULING. The product is applied by brush in a rather abundant layer (this varies according to the thickness of antifouling to be removed), it should be left to act for 1-2 hours, then removed with a scraper or washed with a pressure washer. In case of very thick layers of antifouling, it may be necessary to repeat the operation. At the end of the operation, wash the surface very well with water and a vegetable or synthetic brush.
| Complete drying | 1-3 hours (20c) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Theoretical yield m2 / liter | 2-3 according to the thickness |
| Type | One component |
| Type of binder sol a | Synthetic |
| Specific weight kg / lt (± 0.05) | 1:04 |
| Viscosity Ford | (Ø8 at 20 ° C) Thixotropic |
| Storage (+ 10- + 30c) | 18 months sealed containers |
7K601500
14 Items
Specific References
Recensione
No customer reviews for the moment.
Related Product
MARLIN THINNER N. 2 FOR ANTIFOULING
Specific antifouling thinner essential for marlin and antifouling paints
€6.90
Price
MARLIN TF 0,750 SELF-POLISHING ANTIFOULING
Self-polishing antifouling based on special resins, cupric oxide and antilime agents,
in the colors: oxide red, black and sky blue.
In the colors white and sky blue it is copper-free and is therefore also suitable for light alloy hulls.
€46.90
Price
STANDARD PLUS ANTIFOULING 0.750 ML
Self-polishing antifouling, formulated with copper salts, usable on wooden boats,
medium speed iron and fiberglass up to 30 knots. It is recommended to apply at least 2 coats of the product.
€35.90
Price
AEMME SPACE TOP WHITE VELA TWO-COMPONENT ENAMEL
Two-component enamel with exceptional expansion
specifically formulated for a brilliant finish on luxury yachts and boats
€28.50
Price
16 other products
MARLIN METAL PRIMER 0.250L
Marlin Fondo metal primer to be used before applying antifoulings
on stern drives, boards, any metal part that you want to treat with antifouling
as our velox plus product
€12.50
Price
MARLIN FIBERGLASS PRIMER 0.750L
Marlin primer fiberglass primer to be used before applying antifouling
€22.90
Price
- New
OSCULATI GELCOAT SPRAY CREAM WHITE RAL 9010 400ML
Gelcoat spray for high-resistance finishes.
€9.90
Price
AEMME COLORI SYNTHETIC FILLER SINTOFILLER 0.500LT
SYNTHETIC PUTTY SINTOFILLER 0.500LT
One-component putty based on synthetic resins, with excellent adhesion, excellent filling power, good sandability. It is suitable for use on wood, chipboard panels, metals
€12.90
Price
MARLIN ENAMEL KRISTAL SINGLE COMPONENT WHITE
Kristal the one-component enamel of the marlin
ideal for white blanketing
€17.90
Price
AEMME COLORI SINTLAC SINGLE COMPONENT ENAMEL 750 ML
Glossy, covering finishing enamel,
white or colored for superstructures and maintenance
on board fishing boats and vessels in general.
€13.50
Price
MARLIN PRIMEPOX EPOXY PRIMER 0.75L GRAY
Two-component anti-rust and anti-corrosive primer for light alloys.
€22.50
Price
AEMME COLORI SINTLAC SINGLE-COMPONENT ENAMEL 2.5 LT
Glossy, covering finishing enamel,
white or colored for superstructures and maintenance
on board fishing boats and vessels in general.
€35.90
Price
AEMME PARAFFINATED GELCOAT + WHITE CATALYST 1KG
Two-component epoxy filler for high thicknesses with low specific weight for leveling surfaces.
€21.00
Price
ACRIGLASS SOLVENT UV PAINT A + B
Two-component bright polyacrylic paint with UV filters
€31.50
Price
