STANDARD PLUS ANTIFOULING STC 0.750 ML

New iron hulls. Apply a coat of EPOZINC 2C on sandblasted iron at grade 2-2.5 and let it dry for 12-24 hours. Then apply 2-3 coats of EPOFOND AM / 9 at intervals of no more than 24 hours from each other (at least 6-8 hours), then 2 coats of STANDARD PLUS STC Bianca antifouling 18-24 hours apart. other.

New wooden fairings. Apply a coat of CROMOMINIO-AT widely diluted. Follow with two coats of SOLVER PRIMER, leaving 24 hours between coats. Then apply 2 coats of STANDARD PLUS STC White antifouling at least 12-24 hours apart.

New hulls in fiberglass or plastic

. Degrease with detergents and water and rinse. Lightly sand with fine abrasive papers and dust. Apply a coat of EPOFOND AM-9 or POLIFIBER PRIMER and after 24 hours sand with fine sandpaper. Then apply with 2 coats of STANDARD PLUS STC Bianca 12-24 hours apart.

Aluminum or light alloys .

Degrease the surface well with Thinner 765. Then apply a coat of EPOFOND AM-9 and let it dry for 8 hours but not more than 24 hours. Apply 3 coats of SOLVER PRIMER 24 hours apart, then 2 coats of STANDARD PLUS STC White antifouling 12-24 hours apart

Fairings already painted .

- If the old antifouling is in good condition, compatible, and well anchored, it will be sufficient to apply one or two coats of SOLVER PRIMER before overcoating with 2 coats of STANDARD PLUS STC White antifouling at a distance of at least 12-24 hours between one coat and the other.

-If the old antifouling is not in good condition, restore the support by removing the residues of the old paint with a scraper or brush and then proceed as recommended for new fairings.