Self-polishing antifouling for boats
STANDARD PLUS ANTIFOULING 2,5LT
Self-polishing antifouling
Formulated with copper salts, usable on wooden, iron and fiberglass boats of medium speed up to 30 knots
We recommend applying at least 2 coats of the product
Available in colors: white, black, blue
PREPARATION OF THE SUPPORT AND APPLICATION CYCLE:
New iron fairings. Apply a coat of EPOZINC 2C or EPOFOND AM-9 to sandblasted iron at grade 2-2.5, leaving it to dry for 12-24 hours. Then apply 2 coats of EPOFOND AM / 9 spaced no more than 24 hours apart (min. 6-8 hours), then 2 coats of STANDARD PLUS antifouling at a distance of 18-24 hours apart.
New wooden fairings. Apply one coat of EVIOX CROMOMINIO widely diluted. Follow with two coats of SOLVER PRIMER leaving 24 hours between coats. Then apply 2 coats of STANDARD PLUS antifouling at least 18-24 hours apart.
New hulls in fiberglass or plastic. Degrease with detergents and water and rinse. Sand lightly with fine abrasive papers and dust. Apply one coat of EPOFOND AM-9 or POLIFIBER PRIMER and after 24 hours sand with fine abrasive paper. Then apply with 2 coats of STANDARD PLUS antifouling at a distance of 18-24 hours from each other.
Hulls already painted. - If the old antifouling is in good condition, compatible, and well anchored, it will be sufficient to apply one or two coats of SOLVER PRIMER before overcoating with 2 coats of STANDARD PLUS antifouling at a distance of at least 18-24 hours between coats .
- If the old antifouling is not in good condition, restore the support to new by removing the residues of the old paint with a scraper or brush and then proceed as recommended for new hulls.
| Application | Roller and spray brush |
| Brush-roller dilution | Ready to use or with max 5% Thinner 400 |
| Spray dilution | 10% Thinner 400 |
| Touch drying | 3-4 hours (20 ° c) |
| Placing in water | Min 24-48 hours |
| Overpainting time | 18-24 hours (20 ° c) |
| Application temperature | Between +10 c and +40 c |
| Relative humidity | Less than 80% |
| Dry thickness recommended | 50-60 microns per coat |
| Theoretical yield m2 / liter | 10-12 |
Specific References
No customer reviews for the moment.
One of the best known glues in the world for the repair of water sports items, such as diving suits and fishing waders.
Expansion water drain plug in chromed brass with screw closure.
Equipped with a neoprene rubber pad for an excellent seal. Adaptable to all bushings.
Self-draining hose for liquid and fuel transfer.
Spare pipette for knot counter with 6 m hose
Hard antifouling, containing copper thiocyanate with high antifouling power.
Self-polishing antifouling based on special resins, cuprous oxide and anti-silt agents.
Marlin Self-polishing antifouling for boats
Ready-to-use enamel for the restoration of rubber dinghy tubes
available in white or gray
Specific antifouling for immersed metal parts such as propellers, stern drives, shaft lines.
Marlin Self-polishing antifouling for boats
Self-polishing antifouling, formulated with copper salts, usable on wooden boats,
medium speed iron and fiberglass up to 30 knots. It is recommended to apply at least 2 coats of the product.
Self-polishing antifouling based on special resins, cupric oxide and antilime agents,
in the colors: oxide red, black and sky blue.
In the colors white and sky blue it is copper-free and is therefore also suitable for light alloy hulls.
