STAR TEAK WHITENING
Teak deck whitener. As teak ages, a wood widely used in boat building, it can take on a blackish-gray color caused by oxidation or the action of sunlight which requires a whitening treatment.
STAR TEAK WHITENING is a solution that guarantees the best result for the renewal of the teak color
STAR TEAK WHITENING is part of the Star Teak Line, which also includes Star Teak Detergent and Star Teak Protective
PREPARATION OF THE SUBSTRATE AND APPLICATION CYCLE:
Teak wood
Wash the surface with STAR TEAK DETERGENTE. On the still wet wood, distribute STAR TEAK WHITENING evenly over the entire surface using a brush. Leave on for a few minutes after which rub with a broom or nylon brush to increase the detergent-whitening action of the product.
Then rinse thoroughly with fresh water and leave to dry. If the stains are difficult to remove, it is advisable to repeat the treatment.
(Do not apply in the scorching sun)
Typology | Wood whitener |
Type of binder sol a | Solution with glycol ether |
Specific weight kg / l (± 0.05) | 1,050 |
Storage + 23 ° C (± 2) | 30 months in sealed containers |
Brush-roller dilution | Ready to use |
Application temperature | Between +10 c and +40 c |
Relative humidity | Less than 80% |
Recensione
No customer reviews for the moment.
Related Product
16 other products
ACRIGLASS SOLVENT UV PAINT A + B
Two-component bright polyacrylic paint with UV filters
MARLIN ENAMEL KRISTAL SINGLE COMPONENT WHITE
Kristal the one-component enamel of the marlin
ideal for white blanketing
MARLIN METAL PRIMER 0.250L
Marlin Fondo metal primer to be used before applying antifoulings
on stern drives, boards, any metal part that you want to treat with antifouling
as our velox plus product
AEMME COLORI SINTLAC SINGLE COMPONENT ENAMEL 750 ML
Glossy, covering finishing enamel,
white or colored for superstructures and maintenance
on board fishing boats and vessels in general.
POLYTUK SOLVENT CATALYZED STUCCO A + B 750ML
Stucco both for large thicknesses and for finishing
MARLIN PRIMEPOX EPOXY PRIMER 0.75L GRAY
Two-component anti-rust and anti-corrosive primer for light alloys.