WHITE HULL INTERIOR
Product specifically formulated for applications inside boats for the protection of wooden, iron and fiberglass surfaces
It is a fast drying paint with excellent resistance to sea water, oils and fuels in general
Its use is recommended for bilges, engine rooms and boat floors
We recommend applying at least two coats of the product
750 ml pack
White color
PREPARATION OF THE SUPPORT AND APPLICATION CYCLE
New iron. The substrate must be clean, dry, degreased, free of rust or traces of calamine as well as pre-treated with a hand of suitable anti-rust agent such as EVIOX CROMOMINIO. Then apply 2 coats of INTERNO SCAFI gray or white nail polish, 18-24 hours apart.
New wood. The wood must be cleaned dry and seasoned and possibly treated with a coat of EVIOX CROMOMINIO diluted 30-40%. After 12-24 hours, apply two coats of INTERNO SCAFI gray or white enamel, 18-24 hours apart.
Already painted surfaces:
-If the old paints no longer offer adequate adhesion to the substrate or are crumbly, they must be removed mechanically. Clean the surface well and then follow the instructions above for new substrates.
-If the painted surface is in good adhesion conditions and it is only necessary to restore the finishing coats because they are dirty or opaque over time, clean and degrease the surface well and sand with medium-fine abrasive paper. Remove the dust and sanding residues and apply 2 coats of INTERNO SCAFI gray or white enamel, at a distance of 18-24 hours from each other.
Specific References
No customer reviews for the moment.
Polishes and protects all surfaces of the dinghy in both neoprene and PVC fabrics from UV rays.
Glossy, covering finishing enamel,
white or colored for superstructures and maintenance
on board fishing boats and vessels in general.
Purina AdVENTuROS Sausages grain-free dog snacks with 95% Pork.
Aircraft-grade aluminum speargun designed for better balance in the water.
Stucco both for large thicknesses and for finishing
Two-component anti-rust and anti-corrosive primer for light alloys.
Marlin Fondo metal primer to be used before applying antifoulings
on stern drives, boards, any metal part that you want to treat with antifouling
as our velox plus product
Marlin primer fiberglass primer to be used before applying antifouling
Two-component bright polyacrylic paint with UV filters
Non-slip grit can be mixed into any enamel and applied by spray or brush
SYNTHETIC PUTTY SINTOFILLER 0.500LT
One-component putty based on synthetic resins, with excellent adhesion, excellent filling power, good sandability. It is suitable for use on wood, chipboard panels, metals
