POLYTUK SOLVENT CATALYZED STUCCO A + B 750ML

PREPARATION OF THE SUPPORT AND APPLICATION CYCLE

Fiberglass. The surface must be perfectly clean; degreased with suitable detergents, rinsed, lightly sanded with fine abrasive paper and dusted. Precede with a hand of suitable primer. Apply one pass of POLISTUK adding the catalyst to the grout in relation to the ambient temperature and the desired pot life times. The product must be carefully mixed, taking care to make the grout adhere well to the substrate, applying light pressure with the spatula. The grout can be sanded after about 30-45 minutes after hardening. Overcoat with the recommended finishing cycle.

Iron. The substrate must be perfectly clean, dry, degreased and free from rust or calamine. Any roughening sanding is recommended. Precede with a hand of suitable primer. Apply one pass of POLISTUK adding the catalyst to the grout in relation to the ambient temperature and the desired pot life times. The product must be carefully mixed, taking care to make the grout adhere well to the substrate, applying light pressure with the spatula. The grout can be sanded after about 30-60 minutes after hardening. Overcoat with the recommended finishing cycle.

Aluminum. The substrate must be perfectly clean and brushed. Precede with a hand of suitable primer that is not phenolic. Apply one pass of POLISTUK adding the catalyst to the grout in relation to the ambient temperature and the desired pot life times. The product must be carefully mixed, taking care to make the grout adhere well to the substrate, applying light pressure with the spatula. The grout can be sanded after about 30-45 minutes after hardening. Overcoat with the recommended finishing cycle.