MARLIN GRIP NON-SLIP COATING 1LT

Marlin Grip is a non-slip coating ideal for boat decks.
It is applied very easily with the special roller provided or with any medium-coarse grain sponge roller (or roller for a burnt effect) to obtain a uniform roughness and an excellent anti-slip effect.
The degree of roughness can be easily customized based on the amount applied, the pressure exerted on the roller and the number of passes made with the roller over the paint.

In this way, a very fine and elegant effect can be obtained or a very pronounced and aggressive roughness suitable for racing boats. The average yield is 2 m2 per litre.
Thanks to its composition and unique blend of resins, Marlin Grip has great elasticity but at the same time excellent resistance to trampling, atmospheric agents, water and UV rays. This guarantees a long life over time.
Furthermore, thanks to special additives, it provides a soft and velvety surface under the foot, does not retain dirt and is very easy to wash.
Instructions for use:
1. Surface preparation.
1.1 Thoroughly wash and degrease all surfaces.
1.2 Matt all surfaces with medium sandpaper (no. 180-220) or abrasive felt.
2. Application.
2.1 Pour an adequate quantity of product (yield approximately 2-3 m2 per litre) and spread it with a brush or spatula. The quantity of product to be used varies according to the desired roughness, the greater the quantity the greater the roughness.
2.2 Pass the appropriate roller (or a medium-coarse grain sponge roller) over the spread product. A higher pressure corresponds to greater roughness and anti-slip effect. A lower pressure and/or more passes of the roller correspond to a lower roughness.

Technical features:
Yield: 2-3 m2/l.
Application: brush or spatula.
Packaging: 1 litre.