SINTLAC NAIL POLISH AEMME 2,5 LT

Brilliant, covering, white or colored finish enamel for superstructures and for maintenance on board fishing vessels and boats in general. Applicable only on parts above the waterline, it is marketed at a not negligible quality-price ratio

Available in colors: white and sky blue

New iron. The substrate must be clean, dry and well degreased, free of rust or traces of calamine. Apply 1 or 2 coats of EVIOX CROMOMINIO base followed by 2 coats of SINTLAC enamel in the desired color, respecting the recommended overcoating times.

New wood. Apply 1 or 2 coats of EVIOX CROMOMINIO primer or directly apply 2 coats of SINTLAC enamel in the desired color, respecting the times of overpainting.

Media already painted:

= If the old paints are not perfectly anchored or crumbly, they must be removed mechanically. Clean the surface with detergent and rinse. Leave to dry well. Then proceed with grouting if necessary any surface irregularities, sand and follow the instructions for new substrates (Wood or Iron).

= If, on the other hand, the pre-existing finish is in good adhesion conditions, clean, sand and apply 1-2 coats of SINTLAC enamel in the desired color, respecting the times of overpainting.

NOTE: In the summer and / or in any case at temperatures above 20 ° C, we recommend diluting with Dilatante 109 for brush application.

Type

Application