SINTLAC ENAMEL 750 ML

Glossy, opaque, white or colored finish enamel for superstructures and for maintenance on board fishing boats and boats in general. Applicable only on parts above the waterline, it is marketed at a non-negligible quality-price ratio. Available in different colors as per color chart.

New iron. The substrate must be clean, dry and well degreased, free from rust or traces of calamine. Apply 1 or 2 coats of EVIOX CROMOMINIO base coat followed by 2 coats of SINTLAC enamel in the desired color, respecting the recommended overcoating times.

New wood. Apply 1 or 2 coats of EVIOX CROMOMINIO undercoat or directly apply 2 coats of SINTLAC enamel in the desired color, respecting the overpainting times.

Already painted supports:

If the old paints are not perfectly anchored or crumbly, they must be removed mechanically. Clean the surface with detergent and rinse. Let it dry well. If necessary, proceed to fill any irregularities in the surface, sand and follow the instructions for new substrates (Wood or Iron).

If, on the other hand, the pre-existing finish is in good adhesion conditions, clean, sand and apply 1-2 coats of SINTLAC enamel in the desired color, respecting the overpainting times.

NOTE: In summer and / or in any case at temperatures above 20 ° C it is recommended, for brush application, dilution with Dilatante 109.

Typology

Application